Solenoid Function Solenoid technology is an electro-mechanical device that controls the flow of a media through a pipe by opening or closing the valve orifices. The solenoid assembly consists of a coil, plunger, and sleeve assembly. In a normally closed valve, a plunger return spring holds the plunger against the orifice, preventing flow through the […]
Monthly Archives: April 2019
Proper Valve Sizing Proper valve sizing is critical for controlling valve noise. An inappropriately sized valve 9308-618C can introduce noise issues. Emerson has standardized valve sizing techniques and selection criteria to account for factors that contribute to valve noise, so you can trust our products will work in your plant, as advertised. Exit Jet Independence […]
Powerstroke Diesel Injectors
6.6L LB7 Duramax The LB7 Duramax was first introduced for the 2001 model year as General Motors retired its 6.5L Detroit diesel. In every possible way, the Duramax was superior to the outdated Detroit and marked a revolutionary turning point for GMC and Chevrolet pickups in the diesel marketplace. 2001 also introduced the Allison 1000, […]
Bluestars diesel (www.starsdiesel.net )has a very good market in the fuel injection industry in Peru and throughout the South American market. The products are widely recognized by customers. We will continue to provide quality products and guarantee the most competitive prices, so that customers can benefit with us. We are honored to participate in the […]
The solenoid valve is an industrial device that is controlled by electromagnetic force. It is an automatic basic component used to control fluids. It is an actuator; it is not limited to hydraulic and pneumatic. It is widely used in our daily life. First of all, we have a preliminary understanding of the solenoid valve. […]
The common rail technology refers to a kind of oil supply method in which the injection pressure is generated and the injection process is completely separated from each other in a closed loop system composed of a high pressure oil pump, a pressure sensor and an ECU, and the high pressure fuel pump delivers the […]
First, PT fuel pump The main function of the PT fuel pump is to deliver the fuel plus low pressure (about 0.8~1.2MPa) to the injector. When the spindle oil seal at the PT pump coupling fails, the fuel will pass through the oil seal and enter the oil sump through the timing gear box. In […]
The diesel oil is not clean, causing the needle valve to accelerate the wear and closing. The gas turbulence caused by the high pressure combustion of the combustion chamber causes the needle valve fitting to ablate. Improper cleaning, use of unclean cleaning fluid or improper cleaning. The installation is not correct. The gasket at the […]
One: The steering wheel is not in a deadlock state. The solution is simple. Just force the steering wheel and turn the key. Generally, the steering wheel lock can be unlocked quickly. The ignition is an instant event. Two: Isn’t the gear returned to the P position when parking? Think about the fact that if […]
- 1
- 2